Spare parts CITROËN 8140.43S
ED0164 - ET ENGINETEAM Pressure Control Valve, common rail system
Fiat Iveco Daily II Daily III Fumo Ducato 8140.43S 2,8 JTD 2002+
| Valve type: | Control Valve |
| Injection System: | Common Rail |
| Stock: | 18 pcs |
LH001300 - ET ENGINETEAM Crankshaft Bearing
Citroen Fiat Iveco Peugeot 2,8HDi/D/JTD 8140 1989+
| Standard Size [STD]: | yes |
| Stock: | > 25 pcs |
LH001350 - ET ENGINETEAM Crankshaft Bearing
Citroen Fiat Iveco Peugeot 2,8HDi/D/JTD 8140 1989+
| Oversize [mm]: | 0,5 mm |
| Stock: | 2 pcs |
PM000800 - ET ENGINETEAM Piston with rings and pin
FIAT
| Cylinder Bore [mm]: | 94,4 mm |
| Standard Size [STD]: | yes |
| Bolt Ø [mm]: | 32 mm |
| Bolt length [mm]: | 72 mm |
| Compression Height [mm]: | 58,75 mm |
| Recess Depth 1 [mm]: | 21,4 mm |
| Recess Diameter [mm]: | 39,3 mm |
| Supplementary Article/Supplementary Info: | with piston rings |
Show all
| Stock: | 1 pcs |
| Stock: | 20 pcs |
TS0007 - ET ENGINETEAM Full Gasket Kit, engine
Citroen Jumper, Fiat Ducato, Iveco Daily 2,8HDi/JTD 8140 1999+
| Stock: | 2 pcs |
VA0012 - ET ENGINETEAM Cylinder Sleeve
Citroen Fiat Iveco Opel Peugeot Renault 8140 S9W 700/702 1995+
| Standard Size [STD]: | yes |
| Supplementary Article/Info 2: | Dry Cylinder Sleeve |
| Outer Diameter [mm]: | 97,5 mm |
| Inner Diameter [mm]: | 94,4 mm |
| Length [mm]: | 167 mm |
| Width [mm]: | 5 mm |
| Flange Ø [mm]: | 100,9 mm |
| Machining: | Semi |
Show all
| Stock: | 3 pcs |
VE0026 - ET ENGINETEAM Exhaust Valve
Citroen Fiat Iveco Opel Renault Peugeot 2,8D/TDI/HDi/dTi 1995+
| Length [mm]: | 122 mm |
| Valve stem diameter [mm]: | 8 mm |
| Valve head diameter [mm]: | 36 mm |
| Valve seat angle [°]: | 45 ° |
| Material: | Bi-metal |
| Supplementary Article/Info 2: | Chromed valve stem |
| Valve Seat Material: | Chrome-Mangan-Nickel Steel |
| Valve stem material: | Chrome-silicon-steel |
| Fitting Position: | Exhaust Side |
Show all
| Stock: | > 25 pcs |
VE0083 - ET ENGINETEAM Exhaust Valve
Citroen Fiat Iveco Opel Renault 2,5/2,8D/TD/DTI/HDi 1980-2007
| Length [mm]: | 122 mm |
| Valve stem diameter [mm]: | 8 mm |
| Valve head diameter [mm]: | 34,5 mm |
| Valve seat angle [°]: | 45 ° |
| Material: | Chrome-Mangan-Nickel Steel |
| Supplementary Article/Info 2: | Chromed valve stem |
| Fitting Position: | Exhaust Side |
Show all
| Stock: | > 25 pcs |
VG0031 - ET ENGINETEAM Valve Guide
Citroen Fiat Iveco Peugeot Renault 2,5/2,8HDi/D/TDI 1978+
| Length [mm]: | 56 mm |
| Inner Diameter [mm]: | 8,03 mm |
| Outer Diameter [mm]: | 13,03 mm |
| Material: | Grey Cast Iron |
| Valve type: | for inlet valves |
| Valve type: | for exhaust valves |
Show all
| Stock: | > 25 pcs |
VI0003 - ET ENGINETEAM Intake Valve
Citroen Fiat Iveco Lancia Opel 2,5/2,8D/HDi 1974+
| Length [mm]: | 120,7 mm |
| Valve stem diameter [mm]: | 8 mm |
| Valve head diameter [mm]: | 41 mm |
| Valve seat angle [°]: | 30 ° |
| Material: | Chrome-Mangan-Nickel Steel |
| Surface: | Nitrified |
| Fitting Position: | Intake Side |
Show all
| Stock: | > 25 pcs |
ZM0083 - ET ENGINETEAM Tappet
Fiat Renault Peugeot Citroen 2,5/2,8D/Hdi 1981+
| Operating Mode: | Mechanical |
| Fitting Position: | Intake Side |
| Fitting Position: | Exhaust Side |
Show all
| Stock: | > 25 pcs |